|Total Capacity||2GB kit (1GBx2)|
|Specs||DDR PC2700 CL=2.5 Unbuffered NON-ECC DDR333 2.5V 128Meg x 64 |
|Bullet Features||Increases system performance|
A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other.
184-pin DIMMs are used to provide DDR SDRAM memory for desktop computers. Standard 184-pin DIMMs are available in PC1600 DDR SDRAM, PC2100 DDR SDRAM, PC2700 DDR SDRAM, and PC3200 DDR SDRAM.
To use DDR memory, your system motherboard must have 184-pin DIMM slots and a DDR-enabled chipset. A DDR SDRAM DIMM will not fit into a standard SDRAM DIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor™ tool.)
The number of black components on a 184-pin DIMM can vary, but it always has 92 pins on the front and 92 pins on the back, for a total of 184. 184-pin DIMMs are approximately 5.25 inches long and 1.25 inches high, though the heights can vary. While 184-pin DIMMs and 168-pin DIMMs are approximately the same size, 184-pin DIMMs have only one notch within the row of pins.
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:Is this a low-density or high-density memory?
Q:Does this 2GB kit come in 400Mhz?
A:Yes, you can find the 400MHz version here http://www.crucial.com/store/partspecs.aspx?imodule=CT2KIT12864Z40B
Q:I currently have 1.25 gb installed (I purchased an upgrade from you a couple of years ago). Both slots are full. Does the 2 mb kit come in 2 pieces or will I still have another slot to keep my other 1 gb, making 3 gb in all.
A:This "kit" will consist of two 1GB modules (2x1GB). This system has a maximum capacity of 2GB so you will not achieve 3GB. If you already have a single 1GB installed, you do not need the kit, but a single 1GB module.
A:2gb is I believe the highest this machine will go - 2 slotts of 1 gb each
A:it is two pieces and they are very easy to install,you dont need 3gb with this product
A:As described in the product description, the package is two modules each being 1 GB. Make sure you find out much RAM your system can actually handle before purchasing as well. My system is maxed out with just this package.
A:This is two (2)...1 GB each....That's why it's called a kit. Let the scanner tell you what you need. It's for Dell Dimension 3000. Sounds like you may have something else.
A:This is 2 pcs...a kit. Each one is 1 GB. It's for a Dell Dimension 3000 pc only. If you have this PC, you have two slots....you would have to remove the two you have and replace with these. These are a MATCHED set.