|Total Capacity||2GB kit (1GBx2)|
|Specs||DDR PC3200 CL=3 Unbuffered NON-ECC DDR400 2.6V 128Meg x 64 |
|Bullet Features||Increases system performance|
A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other.
184-pin DIMMs are used to provide DDR SDRAM memory for desktop computers. Standard 184-pin DIMMs are available in PC1600 DDR SDRAM, PC2100 DDR SDRAM, PC2700 DDR SDRAM, and PC3200 DDR SDRAM.
To use DDR memory, your system motherboard must have 184-pin DIMM slots and a DDR-enabled chipset. A DDR SDRAM DIMM will not fit into a standard SDRAM DIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor™ tool.)
The number of black components on a 184-pin DIMM can vary, but it always has 92 pins on the front and 92 pins on the back, for a total of 184. 184-pin DIMMs are approximately 5.25 inches long and 1.25 inches high, though the heights can vary. While 184-pin DIMMs and 168-pin DIMMs are approximately the same size, 184-pin DIMMs have only one notch within the row of pins.
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:Will this work with the iMac Power PC G5, 1.8ghz 17"? I ordered it, then saw another DIMM noted as being specifically for this model of IMac.
A:Yes this will be fine for your system as you need DDR RAM.
Q:I have a Dell Optiplex 170L, why is the 2GB kit not compatible but the individual 1GB sticks are?
A:The Optiplex 170L can support 2GB of memory over the 2 slots (1GB per slot) so a 2GB module would not work.