|Total Capacity||2GB kit (1GBx2)|
|Specs||DDR2 PC2-5300 CL=5 Unbuffered NON-ECC DDR2-667 1.8V 128Meg x 64 |
|Bullet Features||Increases system performance|
A small outline dual inline memory module (SODIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). SODIMMs get their name because they are smaller and thinner than regular DIMMs. The gold pins on the bottom of the SODIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a SODIMM are not connected.
200-pin SODIMMs are used to provide DDR and DDR2 SDRAM memory for notebook computers. 200-pin SODIMMs are available in PC2700 DDR SDRAM, PC3200 DDR SDRAM, DDR2 PC2-6400 SDRAM, DDR2 PC2-5300 SDRAM, DDR2 PC2-4200 SDRAM and DDR2 PC2-3200 SDRAM. To use DDR or DDR2 memory, your system motherboard must have 200-pin SODIMM slots and a DDR- or DDR2-enabled chipset. A DDR or DDR2 SODIMM will not fit into a standard SDRAM SODIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor™ tool.)
The number of black components on a 200-pin SODIMM can vary, but it always has 100 pins on the front and 100 pins on the back, for a total of 200. 200-pin SODIMMs are approximately 2.625 inches long and 1.25 inches high, though the heights can vary. Like 144-pin SODIMMs, 200-pin SODIMMs have one small notch within the row of pins; however, the notch on the 200-pin SODIMMs is closer to the left side of the module.
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:i have a compaq presario v4000 that has 2 memory slots with(2) 212 MiB memory chips. i would like to upgrade my system with the above 2GB kit. is that possible.
A:Yes you certainly can install this part:
Q:is this 333MHz Or 667MHz?
A:The exact speed of this memory is 667MHZ.
Q:will pc2 6400 memery work for pc2 5300 for a sony vaio pcs 7v2l
A:Unfortunately this system only supports speeds of up to PC2-5300. Anything more than this wouldn't work or would make the system unstable.
Q:If my current Dell laptop has 1 GB, do I need to purchase the 2GB upgrade kit or just the 1 GB upgrade?
A:It depends on how the current 1GB is configured - 1 x 1GB or 2 x 512MB. If it is a single 1GB part then you can just add another one to it.
A:Yes - In order to get the best performance you should be matched DDR memory. Also, in many cases the memory that you already have takes up the only memory slots available.
A:You need matching memory sticks. They come packaged as a set. I went from 1 to 2 GB and will now just toss out the original RAM.
Q:Whats its speed?
A:This module runs at 667MHz / PC2-5300 speed.
Q:did a scan showed wrong model #, i have a sony vaio pcg7y2l? is this part still the right part? thanks
A:Sony VAIOs have two codes. The alternative for your model is VAIO VGN-N365E which we list here and offer RAM for:
Q:I have 2 packages of crucial memory that have the following P/N:
A:Both those memory module types will work in your dv6305us system. This system can take a maximum of 2GB of memory which is 2x1GB. What you have there is 4x1GB modules so you may have to return one of the Kit's.
Q:It says X2 do I have to by 2 or is one kit getting me to 2 gb?
A:A 2GB kit already has 2 x 1GB modules so you only need to select quantity 1 of these.
Q:What is the speed in MHz?
Q:How do i up grade to a 3 gb upgrade for my imac ?
A:The maximum memory is reached by using one 2GB SODIMM memory module and one 1GB SODIMM memory module.
A:Add 2Gig. and 1Gig of memory to your imac