DDR 200-pin SODIMM: Approximately 2.625 in. by 1.25 in. (66.7 mm by 31.75 mm)
DDR2 200-pin SODIMM: Approximately 2.625 in. by 1.18 in. (66.7 mm by 30 mm)
Do you have questions about this product?
get answers from real customers and in-house experts with AnswerBox.
Q:Is this ram suitable for HP Pavilian dv 6000, 1.73 Ghz Intel Core Duo T2250 processor, 32bit system. I know that I can update my Ram only upto 2gb
A:This part is not compatible as you require 2X1GB. The link below is the correct part to order:
Q:My computer has 2 slots with 1 GB of RAM each (not Crucial). Can I substitute only one of them with this model? (I know the computer supports up to 3GB). Thank you.
A:Before we can answer this we would require your make and model of system. Please contact your support team with this information below:
Q:Will this work in a Lenovo 3000 N100 0768-DLU? Thanks!
A:That memory is fully compatible with your system and is guaranteed to be compatible.
Q:Will this work on MacBook Pro with 2.2 GHz Intel Core 2 Duo? This seems to have all the same specs but the part number is different than what is found for that machine on this site.
A:Yes this part will be fine for your MBP. When you go through the actual system on our website it will show a small part number such as CT687591 but what you actually receive is a techincal part number and if you ordered the 2GB option through the system link you would be sent CT25664AC667.
Q:Will this product work on a iMac (Late 2006)? Model number: MA589LL
A:Yes it will. The total capacity for this system is made up of a 2GB module and a 1GB module. Here is your system link:
Q:Will this product work on a macbook from mid 2007. Model number: MB062LL/A
A:This system can only accept up to 2GB over 2 slots (1GB per slot), therefore a 2GB module would not be compatible. You can find the correct modules at the following link:
Q:Is this product compatible with an Advent 7090 laptop?
A:That 2GB part is the correct type but wrong size. Your laptop can support up to 2GB in total over the 2 slots - 1GB per slot.
Q:will this ram work in dell inspiron 6000
A:Yes it will indeed.
Q:is this product compadible with a dell inspiron 1521?
A:Yes, that memory module is guaranteed to be compatible with the Dell Inspiron 1521
Q:Would this be compatible with an iMac 7,1?
A:We would need to know some more information on the processor type and speed in order to confirm this. You can also use the Crucial scanner or the drop down menu's in order to show the compatible memory.
I ran the scan, it takes me to this page,
CT3694396 - 8GB DDR3 PC3-12800 Unbuffered NON-ECC 1.5V 1024Meg x 64
I have a new acer aspire E1-522-5423. There is a panel on the back to access the ram and hard drive. They are located in the front of the case not under the keboard...witch is not removable on this model. You can see the memory stick but it appears that you cannot remove it through the opening. Do you have to remove the whole circuit board to remove the ram
or am I missing something?? Acer says there are two slots with only one being used with 4GB stick. The rep I spoke with could not awnser my question on removal. Thanks for any information.
I just got a new Crucial ct102464ba160b http://www.crucial.com/usa/en/ct102464ba160b
based on the suggestion here http://n40l.wikia.com/wiki/Memory that it is compatible with
HP Microserver N54L
My system runs fine the the original 2GB HP memory but when I put the Crucial stick in
it doesn't POST (can't see anything on the screen at all).
How do I check whether the RAM is not compatible or it's simply a DOA?
I have 2x Crucial DDR4's CT8G4DFD8213 in an Asus X99 Deluxe mother board with a Intel 5820K. System boots fine but only shows 8gb of memory in the POST and in BIOS only shows 8gb in DIMM_D1
I have the other 8gb in DIMM_B1 which is the reconmmend configuration for two DIMM's.
I have tried each DIMM in DIMM_D1 to confirm the memory is OK, which it is.
I also updated the BIOS reversion after my troubles to the latest version 904 though I didn't think it would really do anything as the change logs for the BIOS update seem to address other issues and not memory issues.
So I think this memory is maybe not compatible with the new Asus X99 Deluxe mother boards.
got a rare bluescreen 0x0000001a "Memory Management".
My Motherboard is a Gigabyte H97 HD3. (Bios F4)
The Crucial Ram is a 8GB-Kit PC3 - 12800 CL9, 1.5v
I tested both sticks (together) with memtest for 12 passes overnight (0 errors),
Does it make sense to test each on its own ?
Are these components incompatible ?