|Specs||DDR PC3200 CL=3 Unbuffered NON-ECC DDR400 2.6V 128Meg x 64 |
|Bullet Features||Increases system performance|
A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other.
184-pin DIMMs are used to provide DDR SDRAM memory for desktop computers. Standard 184-pin DIMMs are available in PC1600 DDR SDRAM, PC2100 DDR SDRAM, PC2700 DDR SDRAM, and PC3200 DDR SDRAM.
To use DDR memory, your system motherboard must have 184-pin DIMM slots and a DDR-enabled chipset. A DDR SDRAM DIMM will not fit into a standard SDRAM DIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor™ tool.)
The number of black components on a 184-pin DIMM can vary, but it always has 92 pins on the front and 92 pins on the back, for a total of 184. 184-pin DIMMs are approximately 5.25 inches long and 1.25 inches high, though the heights can vary. While 184-pin DIMMs and 168-pin DIMMs are approximately the same size, 184-pin DIMMs have only one notch within the row of pins.
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:My laptop has a crucial ct1007836 1gb installed (as scan recommended) can I use this ct12864Z40B alongside to bring up to max 2gb memory recommended? thanks
A:Yes you certainly can. It will run at the same speed as your existing 1GB part.
Q:Does this work with dell and intel chipset?
A:We would need to know the exact model of Dell system you have before we could guarantee the compatibility. Please confirm your system details and we can confirm if this memory is compatible.
Q:Not mentioned, so does this memory support SPD?
Q:I have two slots for RAM, one slot has a 256 MB DIMM in it now and the other is empty. Is it better to add a 1 GB DIMM for a total of 1.2 GB or buy 1 GB (2 x 512 MB) and remove the 256. If I do the latter, the two DIMMS I have in there will be identical / same speed, etc?
A:The situation is a matching pair of 2 x 512MB (which we offer on our site) running in dual channel or 1 x 1GB + 1 x 256MB running in single channel. I would recommend more RAM running in single channel, so the latter combination.
Q:Can I use this (Part number: CT12864Z40B) in place of part number: CT478526 in my Compaq Presario SR1610NX Desktop PC? They appear to be the same. If not what is the difference between them?
A:They are actually the same part the only difference is that CT478526 is a Kit of two memory modules. Both are fully compatible with your system.
A:Using my external brain (Google), I was able to determine that both part numbers refer to sticks of the same configuration. It appears one is a single stick and the other a kit of two identical sticks.
Q:Is this memory module low density or high density?
A:We provide low density memory for this system as this is the only type it can take. Each 1GB module will have 16 chips on it in total.
Q:Is this RAM low density?
A:Yes, it is standard low density.
Q:WIll this work with windows 7?? The scan I done says Native OS is windows xp home edition
A:The memory module itself is a piece of hardware that will work no matter what Operating System is installed. It is guaranteed to be compatible with your system.
Q:I have an Apple Power Mac G5 dual 2.7 GHz, model G85386YURU4. Will a pair of these chips work? thanks
A:Yes. The Apple Power Mac G5 dual 2.7 GHz can support a maximum of 8GB over the 4 slots (1GB per slot) so you certainly be able to use the above mentioned memory module in your system.
Q:is this 1gb on 1 card? so i can order 2, since i only have 2 slots? or does the 1 gb come on 2 cards?
A:This is a 1GB card. So, when this part is ordered, it would only be one memory module.